Doosan DNM-200/5AX 5-axis Vertical Machining Center, new 2015
Vertical Machining Centers
Doosan DNM-200/5AX 5-axis Vertical Machining Center, new 2015
4+1 axes
Coming out of an east coast Precision Instrument Company
Fanuc-i Series CNC Control
4+1 type 5-Axis
Raptor Fixtures
LNS Chip Conveyor
Spindle Chiller Unit
Renishaw Tool Probe
High Pressure Coolant Through Spindle
Only 8300 cutting hours (approx 900 hours / yr)
One owner machine from a top level aerospace instrument facility
| X-Axis | 15.7" |
| Y-Axis | 17.1" |
| Z-Axis | 19.7" |
| # Axis | 5 |
| Power | 25 hp |
| RPM | 12,000 RPM |
| Taper | CAT40 |
| # ATC | 40 |
| Table-W | 7.87" |
| Table-L | 7.87" |
| Control | CNC (FANUC I SERIES) |
| Dimensions | 112" x 97" x 130" |
| Weight | 12,125 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Travels
X-Axis Travel: 15.7"
Y-Axis Travel: 17.1"
Z-Axis Travel: 19.7"
Feed Rates
X-Axis Rapid Traverse: 1,417 IPM
Y-Axis Rapid Traverse: 1,417 IPM
Z-Axis Rapid Traverse: 1,181 IPM
Cutting Feedrate: 1 - 590 IPM
Table
Rotary Table Diameter: 7.87"
Maximum Table Capacity: 88 lbs
Tool Capacity
Tool Positions: 40
Standard Spindle
Spindle Taper: CAT40
Spindle Power: 15 / 25 hp
Spindle Speed: 12,000 RPM
Spindle Torque: 86 ft-lbs
Power Transmission Type: Direct Drive
Machine Dimensions: 110"H (with head all the way down) x 97"D x 130"W
Machine Weight: 12,125 lbs
