Tsugami S205 CNC Swiss Lathe, New in 2010

To the best of our knowledge all details listed below are deemed correct. It
is the buyer's responsibility to confirm all details and we encourage an
inspection of the machine(s) and accessories prior to purchase.

General Specifications from Brochure:

Control: Fanuc 31iTB
No. of Controllable Axes: 7
(X1, Z1, Y1, X2, Z2, C1, C2
Bar Diameter: 3/4" (20mm)
Machining Length: 8.26" (210mm) (Direct Drive Rotary GB)
9.84" (250) (Static Guide Bushing)
3.14" (80mm) (Carrier Type Rotary GB)
1.77" (45mm) Bushingless
Drilling Diameter: 3/8" (10mm)
Tapping Diameter: M8
Deep Hole Drilling Diameter: 0.31" (8mm)
Back Spindle Chucking diameter: 3/4" (20mm)
Back Spindle Drilling Diameter: 0.31" (8mm)
Back Spindle Tapping Diameter: M6
Tool Spindle Drilling Diameter: 0.23" (6mm) (front tool post/back tool post)
0.31" (8mm) (rear tool post)
Tool Spindle Slotting Diameter: 1-3/16" (30mm) (T1)
Main Spindle Speed: 12,000 RPM
Back Spindle Speed: 12,000 RPM
Rotary Guide Bushing: 8,000 RPM (carrier type)
12,000 RPM (direct drive type)
Tool Spindle Speed: 8,000 RPM
Tool Storage Capacity (std/max): 24 pcs / 35 pcs
Tool Size: 1/2" x 1/2" x 4" (12 x 12 x 100 mm)
Rapid Traverse rate: 1259 IPM (32 m/min)
(X1, Y1: 944 IPM (24 m/min)
(Y2: 590 IPM (15m/min)
Main Spindle: 2.9 / 4.9 HP (2.2 / 3.7 kW)
Back Spindle: 2 / 2.9 HP (1.5 / 2.2 kW)
Tool Spindle: 1 / 1.4 HP (0.75 / 1.1 kW) (Front tool post)
1.34 JP (1.0 kw) (rear tool post)
X1-X2-Z1-Z2-Y2 Axes 0.67 HP (0.5 kw)
Y1 axis: 1 HP (0.75 kW)
Lubricating Pump: 3 W
Power Source Requiements: 14.3 kVA
Compressed Air Requirement: 0.4 MPa oe above
Air Discharge rate: 40 NL/min

Machine Weight: 7055 lbs (3200 kg)
Machine Dimensions: 83" x 47" x 74" (2110 x 1200 x 1885 mm)