Supertec G38P-100CII PLC Universal Cylindrical Grinder, New in 2007
GRINDERS, CYLINDRICAL, N/C & CNCSupertec G38P-100CII PLC Universal Cylindrical Grinder, New in 2007
Hydraulic Table
PLC Control
- Stepping Motor for In / Out
- Programmable Grinding Cycles
- DRO
003-2004 Coolant System with Paper Filter
Paper Filter Roll
Bison 6" set True Scroll Lock 2-piece Top Jaw Chuck
003-4302 Fixed Back-Plate, 6"
OLG-4102 Royal Air-Operated SC Collet Closer
OLG-4104 Kit with Foot Operated Valve for Air SC
003-3003 Micro Wheel Dresser
OLG4-8008 Two axis (X & Z) Digital Readout
003-1001 Balancing Stand
003-1003 Spare Wheel Flange 5"
TRS-1020 Left & Right Tailstock Set
All Available Grinding Wheels, Arbors, etc
Swing | 15" |
Centers | 40" |
Plain or Angle Head | Angle Head |
Grinding Wheel Dia. | 16" |
Wheel Power | 7.5 hp |
Wheel RPM | 1,650 RPM |
Control | CNC (PLC) |
Dimensions | 119" x 90" x 79" |
Weight | 11,440 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Distance Between Centers: 40"
Swing Over Table: 15"
Grinding Diameter: 14"
Load Held Between Centers: 330 lbs
Wheelhead
Swiveling Angle ( R & L): +30 Deg.
Infeed Travel: 9.6"
Hand Feed Travel: 7.8"
Top Slide Travel: 7"
Automatic Rapid Travel: 1-3/4"
Auto Increment Infeed: 0.001" - 0.0999"
Handwheel per Graduation: 0.0002"
Handwheel per Revolution: 0.1"
Grinding Wheel
Size: 16" x 2" x 5"
Wheel Speed: 1,650 RPM
Hydraulic Table
Swiveling Angle Degree (R & L): +7 Deg.
Traverse Speed: 1-1/5" - 275" IPM
Handwheel per Revolution: 4"
Workhead
Swiveling Angle Degree (R & L): 90 Deg.
Center Taper: MT4
Spindle Speed: 350 RPM
Tailstock
Center Taper: MT4
Quill Travel: 1"
Internal Grinding
Spindle Speed: 25 RPM
Grinding Bore: 1.18"-3.94" or 0.79"-1.97"
Grinding Length: 4.33" or 2.17"
Chucking Length: 12-2/5"
Chucking Diameter: 6"
Motor
Wheel Spindle: 7.5 HP
Workhead Motor: 2 HP
Hydraulic Pump: 2 HP
Coolant Pump: 1/4 HP
Internal Grinding Motor: 2 HP
Machine Dimensions: 119" x 90" x 79"
Machine Weight: 11,440 lbs