Acer 4VK Ultima CNC Vertical Knee Milling with Centurion Control, This is a strong retrofit candidate
MILLERS, KNEE, N/C & CNCAcer 4VK Ultima CNC Vertical Knee Milling
There is an electronic issue for the control
Either you can be technical and serivce it or the machine is an excellent candidate for retrofit
Centroid Centurion Control
Kurt Power-Lock Draw Bar
1-Shot Lube
NOTE: this machine was inspected under power and ran all axes. There is a power supply issue or other power issue with the electrics. Not having the time or resources to dive into this issue we offer the machine as-is to someone that can either find and fix the issue or use this Heavy Duty body to retrofit with new controls
Great candidate for retrofit with:
All axes are clean and move well
Ways are in very good condition.
Suggested retrofit kits from ProtoTrak, Fagor, MachMotion, MillPWR, Centroid, Acu-Rite, CNC Fusion, or
Milltronics
Option:
The SMW RT-160 4th Axis Rotary Table (6-1/8" table) w/ SMW Accu-Smart 60 Index Control Box, s/n: 2588, includes 6" faceplate ....................... Sold separately .... $1500
Table-W | 10" |
Table-L | 50" |
Travel-Long | 31" |
Travel-Cross | 16" |
Power | 5 hp |
RPM | 3,600 RPM |
Taper | 40 |
Control | CNC (Centurion) |
Weight | 3,205 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Table Size: 10" x 50"
X-Axis Travel: 31"
Y-Axis Travel: 16"0
Spindle Taper: 40
Spindle Speed: 2,200 RPM
Spindle Motor: 5Hp
Electrics: 220v /3ph / 60hz/ 7.2 Amps