JF Berns Servo Auto Champ 3 Chamfering Machine, NEW

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

*Small Stock Collets only Required for 0.100" - 0.1875" Diameter Bars

General Specifications:
Capacity: 3"
Diameter Range: 0.100" - 3.0"
Spindle Motor: 2 HP
Electrics: 220VAC, 3 Phase

Standard Tooling (Most Common) - Additional Tooling Available (** REQUIRED)
**T1-0030-01 - 30° Chamfer Tool: Includes triangle insert and insert screw (Most common tool) - $435
T1-045-01 - 45° Chamfer Tool: Includes triangle insert and insert screw - $435
T10-R002 - Radius Tool: Does not include insert.
Available insert radius: 0.090", 0.120", 0.160", 0.190", 0.250" $485
T3-1000-30 - Turn and Chamfer Tool: 1.00" turn length with a 30° chamfer. Includes inserts and insert screws - $495

T3-XXXX-30 - Turn and Chamfer Tool: X.XX" turn length with a 30° chamfer. Includes inserts and insert screws - $595
Standard turn lengths: 1.25", 1.50", 1.75", 2.00", 2.50" (Custom lengths can be quoted)

T2-2562-02 - Face Tool: Large, up to 2.56" face, can be combined with T1 Chamfer tools - $975
T2-3375-02 - Large Face Tool: Large, up to 3.38" face, can be combined with T1 Chamfer tools - $1,095

T4-TUBE-ID-OD-FC-30 - Tubing Head Assembly: For simultaneous 30° ID & OD chamfering (debur) and Facing of Tubing.
Includes all (3) cutting cartridges with inserts and insert screws - $1,597

Options - Additional Options Available
S3O-JC-3.5 - Max Diameter 3.50": Jaw Change to make the machine work with bars 0.5" - 3.50" in diameter - $395
S3O-460V-SUP - 460VAC Supply Voltage: Change from 220V to 460V - $875
**S3O-VS - Spindle Motor Variable Speed: speed controlled through touch screen, Highly Recommended - $1,495
S3O-SRV-UPG - Increased Servo Torque: suggested for hard materials, deep cuts and multiple cutting edged tools - $975
S3O-3HP-SPDMTR - 3HP Spindle Motor: Upgrade Spindle from a 2HP spindle motor to a 3HP motor. For deep cuts on hard materials - $895
S3O-LED-LT - LED light: located inside guarding to increase work space visibility - $295

S3O-ADRIP - Cutting oil or coolant Micro-Drops Mister: for deep chamfers, increased tool life.
Includes method so that the unit turns on automatically when doing a chamfer cycle - $997

S3O-FCOOLANT - Flood Coolant System: Recommended for drilling operations and titanium chamfering.
Includes coolant pump, coolant reservoir and chip bin - $1,975

S3O-VSUP - V-Channel Guide: Adjustable 8" long V-Channel to help guide the bar through the chuck jaws - $795
S3O-BSTAND - Bar Support Stand: 1,600 lbs capacity - $245
S3O-CHIP-BIN - Removable Chip Bin: Bin with Tool-less attachment to side of machine, does not sit on floor - $495
S3O-CASTERS - Casters: Locking casters added to machine feet - $965

S3O-ROBOTINTF - Robotic Interface: Provide two dry contact outputs to interface to a robot.
Output 1: Machine Running, Output 2: Chamfer complete (2 sec pulse). Custom interfaces available - $375

S3O-ALTCHAMF - Alternating Chamfer Depths: Program update. Adds mode where the chamfer depth alternates every other cut between 2 depth setpoints - $575
T7-XXXX-01 - Small Stock Collet: Each diameters between 0.100" - 0.188" will require a small stock collet for clamping. (X.XXX = Stock Size) - $565
T6-XXXX-01 - Square Stock Collet: Each square stock size requires a collet. Maximum of 2" square stock. (X.XXX = Stock Size) - $565
S3O-CRATE-HT - Heat Treated Crate: Full Crate, heat treated. Some countries require this process on any wood coming into their country - $495
TBL101-XXX - Manual Load Table: Weight capacity 3,000 lbs, height adjustment 40"-44"