New JF Berns MB3S Manual Bar Chamfering machine, 0.25 - 3"

General specifications from Manufacturer

Bar Diameter Capacity (Round) 1/4" to 3"
Bar Diameter Capacity (Hex) 2-5/8"
Bar Diameter Capacity (Square) 2" Option - square stock adapter
Minimum Bar Length 6" 2" loaded from inside machine
Bar Clamp 10" Chuck
Loading Height (Bar Center From Floor) 42" +/- 1" Plus 2" for caster option
Overall Dimensions 30" W x50" L x50" H
Approx Weight 720 lbs.

Spindle Motor (Std) 2HP
Spindle Motor (Option) 3HP
Spindle Output Speed 436 RPM
Spindle Output Speed (with VFD) 364-873 RPM Option
Spindle Gear Box Ratio (Planetary) 4 to 1
Spindle Motor Amps (2HP) 7A @ (230V) - 4A @ (460V)
Spindle motor Amps (3HP) 10A @ (230V) - 6A @ (460V)
Noise Levels (Running w/o Chamfering) 65 Db
Noise Level (While Chamfering) 72-75 Db
Standard Chamfer Angles 30°, 45° Other angles avail
Turn & Chamfer Std Lengths 1",1.25", 1.5",1.75",2",2.5" Option
Longest Turn & Chamfer 2.50" Option
Face and Chamfer ( Max. Size) 0.31"to 2.56" 2.75" w/ tooling change
Bar Stick-Out Range (Adjustable) 1/2" to 3-1/4" from bar champ jaws

Tube - Face and ID/OD Chamfer Option
Tube Size Range Capacity 3/4" ID Min x 3" OD max (1/2" wall max) option
Face (Max.) 0.50" Option
ID 30" Chamfer (Max.) 0.17" Option
OD 30° Chamfer (Max.) 0.17" Option
ID 45° Chamfer (Max.) 0.15" Option
OD 45° Chamfer (Max.) 0.15" Option

Standard Tooling (prices subject to change without notice)
T1-0030-01 30° Chamfer Tool: Includes triangle insert and insert screw $435
(Most Common)
T1-045-01 45° Chamfer Tool: Includes triangle insert and insert screw $435
T3-1000-30 Turn and Chamfer Tool: 1.00" turn length with a 30° chamfer. $495
Includes inserts and insert screws
T3-XXXX-30 Turn and Chamfer Tool: X.XX" turn length with a 30° chamfer. $595
Includes inserts and insert screws. Standard turn lengths:
1.25", 1.50", 1.75", 2.00", 2.50"Custom lengths can be quoted
T2-2562-02 Face Tool: Large, up to 2.56" face, can be combined with T1 $975
Chamfer tools
T2-3375-02 Large Face Tool: Large, up to 3.38" face, can be combined with $1,095
T1 Chamfer tools
T4-TUBE-ID-OD-FC-30 $1,597
Tubing Head Assembly: For simultaneous 30° ID & OD chamfering
(debur) and Facing of Tubing. Includes all (3) cutting cartridges
with inserts and insert screws

Options (Additional options available - prices subject to change without notice)
M3O-3HP 3HP Spindle Motor: Upgrade Spindle from a 2HP spindle motor $895
to a 3HP motor. For deep cuts and hard materials.
M3O-VS Variable Speed: AC Inverter for variable speeds. Recommended $1,450
for non-mild steel materials, turn and chamfer, facing, center
drilling operations.
M3O-STOP-ARM Stop Arm: Cam driven stop arm, automatically lowers and raises $995
when chamfer head moved forward and back. Recommended.
M3O-AIRCHUCK Air Operated Chuck: Adds actuator, valve and bracket to allow $1,795
quicker and easier opening and closing of the chuck.
M3O-LED-LT LED light: located inside guarding to increase work space $295
visibility
M3O-BARSTAND Bar Support Stand: V-Roller, adjustable height, 1,600 lbs $295
capacity. Two recommended for long bars.
M3O-VSUP V-Channel Guide: Adjustable 8" long V-Channel to help guide $795
the bar through the chuck jaws. Recommended for shorter bars.
M3O-OILDRIP Cutting oil or coolant Micro-Drops Mister: Micro particle oil $945
drip -for deep chamfers and hard materials, increased tool life.
M3O-CASTERS Casters: Locking casters added to base feet $895
M3O-CHIP-BIN Removable Chip Bin: Bin with Tool-less attachment to side of $495
machine, does not sit on floor
T7-XXXX-01 Small Stock Collet (Size Small): Each diameters between 0.100" $585
- 0.188" will require a small stock collet for clamping.
(X.XXX = Stock Size)
T6-XXXX-01 Square Stock Collet: Each square stock size requires a collet. $585
Maximum of 2" square stock. (X.XXX = Stock Size)
M3O-CRATE-HT Heat Treated Crate: Full Crate, heat treated. Some countries $495
require this process on any wood coming into their country